Mobile Menu

01252 875577This email address is being protected from spambots. You need JavaScript enabled to view it.

arleguin pergola white slides

Bio Climatic Pergolas Technical Info

All the beams that make up our bioclimatic pergolas are 6060 first fusion aluminium.

We have different profiles that allow our columns to achieve different support capacities according to the dimensions.

The longest length of a profile is 7150mm and can give a distance of 7000mm between columns.

We have three blade profiles that shall give flexibility in the design. All blades have double walls to provide high stress resistance to snow or wind.

Our standard blades can go up to 3000mm long with a weight of 14kg per m2.

Our XL blades can go up to 3925mm long with a weight of 17kg per m2

Our Revo blades can go 3925mm long with a weight of 15Kg per m2.

The maximum module surface is limited to 16m2 for motorised and 4.35m2 for manual operation.

The posts can be made at heights to meet your requirements and therefore allowing a totally flexible design up to 3200mm.

The following values have been recorded for rain wind and snow. Although check details against each design.

The Rain drainage 230mm/h

Wind resistance 180Km/h

Snow Load 300kg/m2

Product Quality

Each pergola is custom prepared and has the original France Guarantee certificate.

Qualicoat

A testing of quality for the powder coating process. This gives the following benefits.

High UV resistance

Better Colour retention

Good resistance to chemical products.

Qualimarine

This is a pre lacquering aluminium surface preparation for seaside installations. Qualimarine is also highly recommended for heavily polluted industrial areas.

Warranty

Aluminium parts i.e. blades and frame 10 years

Operating mechanisms and motors 3 years

Electronics 2 years

Labour shall be charged for the replacement of components should they be required to be replaced

Maintenance

Use a sponge with soapy water or a non-corrosive cleaning product to clean the system.

Clean the inside of the frames and ensure the gutters are free from leaves.

Regularly check the condition of the seals, pins, rollers and screw tension.

We shall be pleased to offer a maintenance agreement if you require.